Error Indicators - Hanseatic WQP8-7610H User Manual

Problem Possible cause
The dishes are There are food scraps which
not completely are encrusted onto the dish-
clean. es.
The dishes have not been
stacked optimally.
You have selected the incor-
rect dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not ro-
tate unhindered.
The nozzles on the spraying
arm are blocked/calcified.

Error indicators

Code Cause
Glass The water inflow is too
low.
90 min.
Short
Programme dis-
play "Short" flash-
es very fast.
Water overflow
Glass
90 min.
Short
Programme dis-
play "Glass" flash-
es very fast.
Troubleshooting table
Solution
Soak dirty dishes prior to washing the dish-
es.
Stack the dishes in such a way that all
parts can be reached by the water jets (see
„Loading the dishwasher" on page EN-15).
Select the correct dishwashing programme
(see „Dishwasher programme table" on
page EN-18).
Use the correct dosage of dishwasher de-
tergent (see „Dishwasher programme ta-
ble" on page EN-18).
Ensure that no dishes are impeding the
motion of the spraying arm.
Clean the nozzles (see „Cleaning the spray-
ing arm" on page EN-23).
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is
not kinked (see „Connecting the inlet hose"
on page EN-25).
Ensure that the water pressure is correct. See
„Technical specifications" on page EN-31.
Switch off the tap. Find the gap in the seal (or
have someone find it) and repair the leak (or
have it repaired).
Page EN-29