Use Multitabs - Hanseatic WQP8-7610H User Manual

Dishwasher detergents, rinse aids and dishwasher salts
2. The large compartment (25) is the main
wash compartment; the small one (26) is
the pre-wash compartment.
3. Add dishwasher detergent.
a) For wash programmes with a pre-wash
cycle, put
– ⅔ into the main wash compartment
(25) and
– ⅓ into the pre-wash compartment
(26).
b) For wash programmes without a pre-
wash cycle, put the whole amount into
the main wash compartment (25).
4. Push the dispenser cover closed so that
the catch (24) clicks into place once
again.

Use multitabs

9h
6h
3h
Verzögerung
Many multitabs already contain dishwash-
er detergent, dishwasher salt and rinse aid,
meaning that you do not need to use these
three products separately. In this case, you
can ignore display notifications
(10).
If your water is in the
– "soft" to "medium" hardness range, multi-
tabs will deliver good results.
– "hard" range, we would recommend that
you do not use multitabs and instead use
dishwasher detergent, dishwasher salt and
rinse aid individually.
To determine and adjust the water
hardness see page EN-13.
1. Pull back the catch (24) on the detergent
(9) (10)
2. Place a multitab in the main wash com-
3. Push the dispenser cover closed so that
Start/Pause
(9)and
(24) (20)
dispenser (20).
The cover will pop open.
(25)
partment (25).
the catch (24) clicks into place once
again.
Page EN-11