Related Standards; International Standards - Omron Sti F3SJ-A Series User Manual

Related Standards

International Standards

• IEC61496-1:2004 Safety of machinery - Electro-sensitive protective equipment - Part 1: General
requirements and tests
• IEC61496-2:2004 CDV Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular
requirements for equipment using active opto-electronic protective devices
• IEC61508-1:1998,
IEC61508-6:2000, IEC61508-7:2000 Functional safety of electrical/electronic/programmable electronic
safety-related systems
• ISO13855:2002 Safety of machinery - Positioning of protective equipment with respect to the approach
speeds of parts of the human body
European Standards
• EN61496-1:2004 Safety of machinery - Electro-sensitive protective equipment - Part 1: General
requirements and tests
• prEN61496-2:2004 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular
requirements for equipment using active opto-electronic protective devices
• EN61508-1 through -7:2001 Functional safety of electrical/electronic/programmable electronic safety-
related systems
• EN954-1:1996 Safety of Machinery - Safety-related parts of control systems - Part 1: General principles
for design
• EN415-4:1997 Palletisers and depalletisers
• EN692:1996 Mechanical presses
• EN693:2001 Hydraulic presses
•EN999:1999 Safety of machinery - Positioning of protective equipment with respect to the approach
speeds of parts of the human body
• EN1037:1995 Safety of machinery : Preventation of unexpected start-up
U.S. Federal Regurations
•OSHA 29 CFR 1910.212 General requirements for all machines
•OSHA 29 CFR 1910.217 Mechanical power presses
U.S. Standards
• ANSI B11.1:2001 Mechanical power presses
• ANSI B11.2:1995(R2005) Hydraulic power presses
• ANSI B11.3:2002 Power press brakes
• ANSI B11.4:2003 Metal shears
• ANSI B11.5:1988(R2002) Iron workers
• ANSI B11.6:2001 Lathes
• ANSI B11.7:1995(R2005) Cold headers and cold formers
• ANSI B11.8:2001 Drilling, milling, and boring machines
• ANSI B11.9:1975(R2005) Grinding machines
• ANSI B11.10:2003 Metal sawing machines
• ANSI B11.11:2001 Gear cutting machines
• ANSI B11.12:2005 Roll forming and roll bending machines
IEC61508-2:2000, IEC61508-3:1998, IEC61508-4:1998, IEC61508-5:1998,
Appendix
E
F3SJ-A
207
User's Manual