Omron Sti F3SJ-A Series User Manual page 114

What can be done by the setting tool
2. Zone Overlap Condition
A condition to configure setting zones as overlapped.
Except for combination of muting zone and fixed blanking zone (figure 3), setting zones of these 4
functions cannot be configured as overlapped. (Figure 4)
Zone overlap condition
Muting Function
Fixed Blanking Function
Floating Blanking Function
Warning Zone Function
: Setup available
x: Setting not possible
Even if a muting zone and a fixed blanking zone are configured as overlapped, fixed blanking monitoring function is
effective. Thus a fixed blanking beam receives light under muting, operation is based on setting of the monitoring
function.
F3SJ-A
94
User's Manual
Muting Function
-
x
x
Muting zone
Fixed blanking zone
Figure 3
Fixed Blanking Floating Blanking
Function Function
x
x x
x -
x x
Alarm zone
Muting zone
Floating blanking zone
Fixed blanking zone
Figure 4
Warning Zone
Function
x
x
x
-