Omron Sti F3SJ-A Series User Manual page 175

3.
Attach the intermediate mounting brackets (for backside mounting).
For backside mounting, first lightly attach intermediate mounting bracket (1) to the equipment, wall
surface, etc. Then, attach intermediate brackets (1) and (4) to the bracket that was lightly attached to
the case in step 2 above, and lightly tighten them using the included mounting screws (M4x25).
Intermediate
mounting
bracket (1)
4.
Attach the intermediate mounting brackets (for side mounting).
When performing side mounting, first attach the intermediate mounting bracket for side mounting to
intermediate mounting bracket (1), using the included mounting screws (M5x10). Then, lightly attach
intermediate mounting bracket (4) to the bracket that was lightly attached to the case in step 2 above,
using the included mounting screws (M4x25).
Intermediate
mounting
bracket (1)
Mounting screw
(M5x10)
Intermediate
mounting
bracket (4)
Mounting screw
(M4x25)
Intermediate mounting
bracket for
side mounting
Intermediate
mounting
bracket (4)
Mounting screw
(M4x25)
Wiring/Installation
Intermediate
mounting
Tighten lightly
bracket (1)
Tighten lightly
F3SJ-A
User's Manual
E
155