Using The Hardware; Using The Keypad; Using The Stylus - Unitech PA500IIBTG User Manual

Using the Hardware

Using the Keypad

The PA500II keypad has a navigation key and six special keys to launch
particular applications and display the on-screen keyboard.
1
3
No. Button Name
1 ESC
2 P
1
3 P
2
4 P
3
5 P
4
6 Enter
7 Navigation key
8 OK

Using the Stylus

CAUTION! Never use anything other than PA500II stylus on the screen;
otherwise this could cause a permanent damage.
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
2 7 5
Description
Press the ESC button to exit from the section you entered.
Press P to enable Task Manager.
1
Press P to enable scanner.
2
Press P to enable Battery.
3
Press P to enable Device Setting.
4
Press the Enter button to access the menu options and confirm
your selection.
Use the up, down, left, and right arrow keys to navigate through
the menu options.
Press the OK button to access the menu options and confirm
your selection.
Chapter 2
6
8
4
9