Table of Contents
Advertisement
Method 2: From Hardware
1.
Remove the stylus from its holder.
2.
Lightly press the tip of the stylus to the reset button located at the rear side
of the terminal.
Performing a Cold Boot
A cold boot will erase all data and all programs you have added, and will
restore the device to the default factory settings.
Never perform a cold boot unless a warm boot does not correct your problem.
When you perform your next ActiveSync operation, you can restore any data
that you previously synchronized to your computer or you can restore data that
you backed up to a storage card.
Method 1: From Windows Mobile
Tap Start → BootMode.
1.
The BootMode Screen appears.
22
Copyright 2011 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Reset button
Advertisement
Table of Contents
