Warm Boot Via Software; Warm Boot Via Hardware; Cold Boot - Unitech HT680 User Manual

Warm Boot via Software

Tap Start → Programs →
BootMode.
Tap "Warm Boot". The system will be warm
started.

Warm Boot via Hardware

Use a blunt pin (like an unfolded paper clip) to
stab the warm-boot pinhole located on the
front of the HT680, above the keypad.

Cold Boot

A Cold Boot is used to reset the operating
system, restore the terminal back to factory
default, and reset the terminal after a
bootloader, keyboard, or kernel upgrade. You
are also allowed to stab the cold-boot pinhole
to cold boot the HT680.
WARNING - Performing a Cold Boot will return the HT680 to its original
factory settings!
Utilities →
cold-boot
pinhole
warm-boot
pinhole
21