Performing A Hardware Reset - Unitech EA300 User Manual

EA300 User's Manual

2.2 Performing a Hardware Reset

You may have to perform a reset if the device freezes (i.e., the terminal no
longer responds to the buttons or tapping on the screen).
Long press Power key around 10 seconds to restart the device.
2.2.1 Warm Boot
Please long press power button to start warm boot.
2.2.2 Cold Boot
Please press Fn key + reset button simultaneously to start cold boot.
17
© 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.