Master/Slave Mode - Ledj LEDJ283A User Manual

Built-in program mode:
To access the built-in program mode press "MODE" until the display shows
Press "SETUP" to confirm the setting. Use the "UP" and "DOWN" buttons to select a program from
Pr. 0 1 Pr. 1 2
~ . Press the "SETUP" button to confirm the setting.
To change the speed of the selected program press the "SETUP" button and then use the "UP" and
"DOWN" buttons to select any value from
setting, then use the "UP" and "DOWN" buttons to select and value from
strobe feature. Press the "SETUP" button to confirm the setting.
Pr. 0 1
In you are able to set a specific static colour. When in
then use the "UP" and "DOWN" buttons to go through the static colours. Press the "SETUP" button to
confirm the setting, then use the "UP" and "DOWN" buttons to select and value from
for the strobe feature. Press the "SETUP" button to confirm the setting.
To exit out of any of the above options, press the "MODE" button.
Programs:
Pr.01 Static colour
Pr.02 6 colour fade in/out
Pr.03 Colour fade in/out
Pr.04 Colour fade
Pr.05 6 colour change
Pr.06 Colour change
Pr.07 Red continuous fade
Pr.08 Green continuous fade
Pr.09 Blue continuous fade
Pr.10 White continuous fade
Pr.11 Amber continuous
fade
Pr.12 UV continuous fade

Master/slave mode:

To set the master unit, press the "MODE" button on the rear of the master unit then select your desired
program (sound active, auto, static colour or one of the built-in programs). To set the other units in slave
mode, press the "MODE" button on the rear of the unit to show
the "SETUP" button to confirm the setting. The units will now run in sequence with the master unit.
To exit out of any of the above options, press the "MODE" button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
www.prolight.co.uk
SP00 SP99
~
Static colours:
0. O ff - Blackout
1. - -r - Red
2. - -g - Green
3. - -b - Blue
4. - -u - White
5. - -A - Amber
Spectra Par 12HEX10 PRO User Manual
Operating instructions
Pr. 0 1
. Press the "SETUP" button to confirm the
F500
Pr. 0 1
press the "SETUP" button and
6. - -I - UV
7. - rg - Orange
8. - rg - Yellow
9. - rb - Magenta
10. - rb - Hot Pink
11. - gb - Cyan
SLAu
on the LED display and press
on the LED display.
F599
~ for the
F500 F599
~
12. - ru - Pastel Red
13. - gu - Pastel Green
14. - bu - Pastel Blue
15. - uu - Warm White
16. - cu - Cool White
5