Power Linking - Ledj LEDJ283A User Manual

Power linking:

This fixture provides power linking via the power output on the rear allowing multiple units to be
connected together. The maximum number of fixtures that can be connected is 12 fixtures @ 240V
or 6 fixtures @ 120V (including the first fixture). After the maximum number of fixtures are
connected a new power run will need to be started.
Please note: Caution should be used when power linking other fixtures to the Spectra Par 15Q8 PRO as
the power consumption of other fixtures will vary. LED fixtures fitted with switch mode power supplies
often require 2/3 times more current on startup, these may require their own power source.
POWER INPUT:
100-240V~50/60Hz
www.prolight.co.uk
SPECTRA PAR
12HEX10 PRO
POWER OUTPUT:
100-240V~50/60Hz
MENU SETUP UP DOWN
POWER CONSUMPTION: 130W
www.prolight.co.uk
DMX INPUT DMX OUTPUT
Spectra Par 12HEX10 PRO User Manual
Multiple fixture power linking
SPECTRA PAR
12HEX10 PRO
POWER INPUT: POWER OUTPUT:
100-240V~50/60Hz 100-240V~50/60Hz
MENU SETUP UP DOWN
POWER CONSUMPTION: 130W
www.prolight.co.uk
DMX INPUT DMX OUTPUT
9