Master/Slave Mode - Ledj LEDJ251 User Manual

Colour change mode:
To access colour change mode press "MENU" until the display shows
Press "ENTER" to confirm the setting. Use the "UP" and "DOWN" buttons to ajust the speed between
CC00 CC99
~ . Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Colour fade mode:
To access colour fade mode press "MENU" until the display shows
Press "ENTER" to confirm the setting. Use the "UP" and "DOWN" buttons to ajust the speed
CP00 CP99
between ~
To exit out of any of the above options, press the "MENU" button.
Auto mode:
To access auto mode press "MENU" until the display shows
Press "ENTER" to confirm the setting. Use the "UP" and "DOWN" buttons to ajust the speed
dE00 dE99
between ~
To exit out of any of the above options, press the "MENU" button.
Static colour mode:
To access the static colour mode press "MENU" until
Now use the "UP" and "DOWN" buttons to select the brightness between
"ENTER" button and repeat for green (
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the "MENU" button.

Master/slave mode:

To set the master unit, press the "MENU" button on the rear of the master unit to select your
desired program (sound active, auto, static colour or colour fade).
To set the other units in slave mode, press the "MENU" button on the rear of the unit to show
on the LED display and press the "ENTER" button to confirm the setting. The units will now run in
sequence with the master unit.
To exit out of any of the above options, press the "MENU" button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the "MODE" button on the rear of the unit to show
on the LED display. The unit will now respond to sound.
To exit out of any of the above options, press the "MODE" button.
www.prolight.co.uk
. Press the "ENTER" button to confirm the setting.
. Press the "ENTER" button to confirm the setting.
G
), and blue (
Performer 36 RGB MKII User Manual
Operating instructions
CC--
CP--
dE--
on the LED display.
r. 2 25
shows on the LED display.
r. 0 00
b
).
on the LED display.
on the LED display.
r. 2 55
~ . Press the
d001
bEbE
5