Figure 2-3: Ag7 Module Connectors - Tektronix HDLG7 User Manual

Operating Basics
AG7 Module Connectors
2–4
The AG7 Audio Generator module is equipped with six BNC connectors as
described below. (See Figure 2-3.)

Figure 2-3: AG7 module connectors

1+2: Outputs channels 1 and 2 of the selected AES/EBU serial digital audio
signal.
3+4: Outputs channels 3 and 4 of the selected AES/EBU serial digital audio
signal.
5+6: Outputs channels 5 and 6 of the selected AES/EBU serial digital audio
signal.
7+8: Outputs channels 7 and 8 of the selected AES/EBU serial digital audio
signal.
SILENCE: Outputs a silence signal (DAR signal).
48 kHz CLOCK: Outputs a 48 kHz clock signal. The clock output level
can be set as described below.
Setting the Clock Output Level. Use jumper J452 on the AG7 module to set the
output level of the 48 kHz clock signal. (See Figure 2-4.)
TG700 TV Signal Generator Platform User Manual