Operating Procedure; Ag7 Module Main Menu - Tektronix HDLG7 User Manual

AG7 Audio Generator Module

Operating Procedure

AG7 Module Main Menu

3–2
After the AG7 module is installed in the mainframe, and the mainframe is installed
in the rack or other location where it will be used, use the following procedure to
access each function of the module:
1. Connect the power cord to the power connector on the rear panel, and then
plug the cord into the AC electric power source. Electric power is supplied
to the mainframe.
2. Wait until the power-on initialization process is complete, and then check that
there are no error messages on the display.
3. After the initialization process, the mainframe main menu appears as shown
below.
4. Press the front-panel MODULE button until the AG7 module main menu
appears as shown below.
5. Use the front-panel arrow buttons to navigate and select items in the main
menu and submenus. (See page 3-2, AG7 Module Main Menu.)
Use the AG7 module main menu to perform the following tasks:
Select the audio channel whose parameters are to be changed
Select the audio data resolution
Select the frame reset signal to be synchronized
Select the timing offset for the audio signal outputs
TG700 TV Signal Generator Platform User Manual