Advertisement
MPD-62M2812P0A
Installation Instructions
1. Drill three holes for mounting on the ceiling or wall.
2. Place the Easy Adaptors at the pre-drilled installation position and fix it by
using mounting screws.
3. Route the power/video cable to the connecting place.
4. Attach the dome base assembly to the Easy Adaptor.
5. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
6. Assemble the dome cover to the dome base unit.
CAUTION
• Be careful the LEDs when you control
the OSD setting with the joystick.
• Remove the sticker on the gimbal after
the OSD setting
Plastic Anchor
(6x30mm)
Mounting Screw
(3.5x25mm)
10
Advertisement
