Table of Contents
Advertisement
Quick Links
10211 ZINS-Z912-43
60
15
4 body mounting holes and 2 track holes as indicated on this sheet.
100
• Screw body in place using screws as shown.
• Assemble arm to pinion as shown.
• Secure arm and rail foot with screw provided.
If Hold Open is not required do not tighten HO screw.
(B1) X 1
(M4) X 1
(T2) X 4
22.5
48
Slip rail foot into track and insert end caps.
Push track and arm towards frame and secure in position.
(T1) X 2
EN1
750mm
20kg
175
9Nm
8
13Nm
175
175
18Nm
7
M6x10mm
(Full Cover
(C1) x 1
only)
M6x20mm
(M1) x 2
(M2) x 4
M5x50mm
M5x50mm
(T1) x 2
(T2) x 4
10gx50mm
10gx50mm
Timber
drill
3
Metal
drill
4.2 and tap M5
(A1) X 2
(B1) x 1
Advertisement
Table of Contents
Related Manuals for Assa Abloy Lockwood 724 Series
Summary of Contents for Assa Abloy Lockwood 724 Series
- Page 1 10211 ZINS-Z912-43 750mm 20kg 13Nm 18Nm (B1) x 1 M6x10mm (Full Cover (C1) x 1 only) M6x20mm (M1) x 2 (M2) x 4 M5x50mm M5x50mm (T1) x 2 (T2) x 4 10gx50mm 10gx50mm Timber drill Metal drill 4.2 and tap M5 Slip rail foot into track and insert end caps.
- Page 2 724-221 750mm 20kg 13Nm 18Nm (B1) x 1 M6x10mm (Full Cover (C1) x 1 only) M6x20mm (M1) x 2 (M2) x 4 (T1) x 2 (T2) x 4 M5x50mm M5x50mm 10gx50mm 10gx50mm Timber drill Metal drill 4.2 and tap M5 •...
Need help?
Do you have a question about the Lockwood 724 Series and is the answer not in the manual?
Questions and answers