Trolling Motor Installation And Operation; Mount Bracket Installation - MotorGuide X5 Series Manual

TROLLING MOTOR INSTALLATION AND OPERATION

Mount Bracket Installation

c
a - X5 bow mount bracket
b - Latch release handle
c - Bracket door knob
1. Select an appropriate area on the deck of the boat to install the mount.
Ensure that the forward mounting screws will not penetrate the hull.
IMPORTANT: Choose an area on the boat deck that allows a 7.6 cm (3 in.)
clearance between the bow of the boat and the column of the trolling motor.
a - Clearance 7.6 cm (3.0 in.)
2. Place the bow mount base on the surface of the boat deck. Use the
mount base as a template to mark the locations of the front mounting
holes and the rear mounting holes on the mount base.
eng
a
a a
b
58592
15
58593