TROLLING MOTOR INSTALLATION AND OPERATION
Mount Bracket Installation
c
a -
X3 bow mount bracket
b -
Latch release handle
c -
Bracket door knob
1. Select an appropriate area on the deck of the boat to install the mount.
Ensure that the forward mounting screws will not penetrate the hull.
IMPORTANT: Choose an area on the boat deck that allows a 7.6 cm (3 in.)
clearance between the bow of the boat and the column of the trolling motor.
a a
a -
Clearance 7.6 cm (3.0 in.)
2. Place the bow mount base on the surface of the boat deck. Use the
mount base as a template to mark the locations of the front mounting
holes and the rear mounting holes on the mount base.
a
b
54513
14
54514
eng