Deploying The Trolling Motor - MotorGuide X5 Series Manual

TROLLING MOTOR INSTALLATION AND OPERATION
5. Position the tie‑down strap over the composite column and through the
buckle. Pull it tight, then secure the hook‑and‑loop backing together to
secure the motor to the mount bracket.
a

Deploying the Trolling Motor

Rotating propellers can cause serious injury or death. Never start or operate
the motor out of water.
Moving parts, such as hinges and pivot points, can cause serious injury.
Keep away from moving parts when stowing, deploying, or tilting the motor.
Avoid possible serious injury from the motor dropping suddenly when
adjusting the motor depth. Firmly grasp the motor shaft with one hand when
raising or lowering the motor.
1. Remove the tie‑down strap securing the trolling motor to the mount
bracket.
2. Firmly grasp the latch release handle.
3. Snap the latch release handle to disengage the lock pin.
4. Continue to maintain tension on the latch release handle while lowering
the trolling motor into the water.
a -
58617
WARNING
!
CAUTION
!
CAUTION
!
22
Tie‑down strap
eng