MotorGuide X5 Series Manual page 38

2. While holding the propeller blade with one gloved hand, use a 9/16 in.
wrench or a ratchet to remove the propeller nut. Remove the propeller nut
and washer (or anode, for saltwater models).
IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket.
Using another tool may damage the propeller nut or shaft. If the propeller
cannot be removed easily, use a rubber mallet to lightly tap the back side of
the opposite blade. If the propeller cannot be removed, have the propeller
removed by an authorized dealer.
NOTE: Replace the propeller pin if it is bent.
INSTALLING THE PROPELLER
1. Rotate the motor shaft to insert the propeller pin horizontally.
44664
2. Install the propeller onto the motor shaft by engaging the propeller onto
the propeller pin.
MAINTENANCE
a - Propeller pin
a
53442
57326
32
eng