MotorGuide X5 Series Manual page 30

TROLLING MOTOR INSTALLATION AND OPERATION
CABLE STEER MODELS
Adjust the depth of the motor to improve trolling motor performance in various
water depths and wave conditions.
IMPORTANT: When adjusting the motor depth, ensure that the propeller
blades are fully submerged 15–30 cm (6–12 in.) below the water surface to
avoid ventilation.
1. Firmly grasp the column with one hand.
2. Loosen the bracket door knob until the motor column slides freely.
3. Raise or lower the motor column until the propeller blades are submerged
15–30 cm (6–12 in.) below the water surface, then tighten the bracket
door knob.
4. Adjust the breakaway knobs on each side of the mount so the motor will
break away if it encounters underwater obstructions.
b
a
HAND-OPERATED MODELS
Adjust the depth of the motor to improve trolling motor performance in various
water depths and wave conditions.
IMPORTANT: When adjusting the motor depth, ensure that the propeller
blades are fully submerged 15–30 cm (6–12 in.) below the water surface to
avoid ventilation.
1. Firmly grasp the column with one hand.
2. Loosen the depth adjustment collar until the motor column slides freely.
3. Raise or lower the motor column until the propeller blades are submerged
15–30 cm (6–12 in.) below the water surface, then tighten the depth collar.
a - Bracket door knob
b
b - Breakaway knobs
58607
24
eng