HIKVISION DS-2CE56H1T-IT1E User Manual page 13

5. Click the direction arrow to control the camera.
1). Click up/down direction button to select the
item.
2). Click Iris + to confirm the selection.
3). Click left/right direction button to adjust the
value of the selected item.
3.1 OUTPUT MODE
In the OUTPUT MODE submenu, you can set
RESOLUTION, FRAME RATE, and NTSC/PAL.
RESOLUTION
Resolution refers to the number of the pixels contained
in an image. You can set the resolution as 5 megapixels,
4 megapixels or 1080p. The higher the value, the finer
the image is.
FRAME RATE
Frame rate refers to the number of image output in 1
second.
When the resolution is set as 5 megapixels, you are
allowed to set the frame rate as 20 fps or 12.5 fps.
When the resolution is set as 4 megapixels, you are
allowed to set the frame rate as 25 fps or 30 fps.
NTSC/PAL
PAL
(Phase Alternating Lines) is a color encoding system for
analog television used in broadcast television systems in
most countries.
NTSC
(National Television System Committee) is the analog
television system that is used in most of North America,
parts of South America, Myanmar, South Korea, etc.
3.2 LANGUAGE
Supports English, and Chinese.
3.3 EXPOSURE
Exposure describes the brightness-related parameters,
which can be adjusted by BRIGHTNESS, EXPOSURE
MODE, GAIN, DWDR and ANTI-FLICKER.
BRIGHTNESS
Brightness refers to the brightness of the image.
You can set the brightness value from 1 to 10 to darken
or brighten the image. The higher the value, the
brighter the image is.
Figure 3-3 OUTPUT MODE
EXPOSURE
BRIGHTNESS
EXPOSURE MODE
GAIN
DWDR
ANTI-FLICKER
BACK
Figure 3-4 EXPOSURE
5
GLOBAL
LOW
OFF
ON