HIKVISION DS-2CE56H1T-IT1E User Manual page 10

5. Secure the junction box's body with supplied screws
on the ceiling/wall.
6. Combine the junction box's cover with the junction
box's body.
Junction Box Body
7. Repeat steps 6 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to install the camera to the
junction box.
2.3.2 Wall Mounting
Before you start:
You need to purchase a wall mounting bracket
separately.
Steps:
1. Drill four screw holes in the wall according to the
holes of the bracket.
2. Install the bracket to the wall by aligning the four
screw holes of the bracket with expansion screws on
the wall.
3. Secure the bracket with four hex nuts and washers.
4. Install the mounting base of the turret camera to
the wall mounting bracket, and secure them with
supplied screws.
Figure 2-18 Install the Mounting Base to the Bracket
5. Route the cables through the bracket.
6. Repeat steps 7 to 9 of 2.1.1 Ceiling/Wall Mounting
without Junction Box to complete the installation.
2.4 Ceiling Mounting of Type III Camera
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Figure 2-16 Fix the Gang Box
Figure 2-17 Install the Bracket
Junction Box Body
Junction Box Cover