HIKVISION DS-2CE59H8T-(A)VPIT3ZF User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CE59H8T-(A)VPIT3ZF
  6. User manual

HIKVISION DS-2CE59H8T-(A)VPIT3ZF User Manual

Turbo hd dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
H8T Series Dome Camera
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Type I Camera
Type II Camera
Type III Camera
This manual may contain technical incorrect places or
printing errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
TURBO HD
User Manual
Model
DS-2CE59H8T-(A)VPIT3ZF
DS-2CE56H8T-(A)ITZF
DS-2CE5AH8T-(A)VPIT3ZF
0100001080730

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-2CE59H8T-(A)VPIT3ZF and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-2CE59H8T-(A)VPIT3ZF

Summary of Contents for HIKVISION DS-2CE59H8T-(A)VPIT3ZF

  • Page 1 This manual applies to the models below: Type Model Type I Camera DS-2CE59H8T-(A)VPIT3ZF DS-2CE56H8T-(A)ITZF Type II Camera DS-2CE5AH8T-(A)VPIT3ZF Type III Camera This manual may contain technical incorrect places or printing errors, and the content is subject to change without notice.

  • Page 2: Regulatory Information

    Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 3 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”. Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 4 To avoid heat accumulation, good ventilation is  required for the operating environment. Keep the camera away from liquid while in use for non-  water-proof device. While in delivery, the camera shall be packed in its  original packing, or packing of the same texture. Mark Description Table 0-1 Mark Description Mark...

  • Page 5: Installation

    Note: Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS. 1.2.3 Overview of Type III Camera Switch Button Video Cable Power Cord Back Box Lens Bubble Figure 1-3 Overview of Type III Camera...
  • Page 6 Type I Camera Type II Camera Figure 2-1 The Drill Template Note: Drill the cable hole, when adopting the ceiling outlet to route the cable. 3. Loosen the screws on the bubble of the dome camera to remove the bubble and the black liner. 4.
  • Page 7 Type I Camera 0° to 355° 0° to 75° 0° to 355° Figure 2-4 3-Axis Adjustment 9. Fit the black liner back to the camera and tighten the screws on the bubble of the dome camera to finish the installation. 2.2 Wall Mounting of Type I and Type II Camera Before you start: You need to purchase a wall mount first.
  • Page 8 2. Drill screw holes and the cable hole (optional) on the ceiling according to the supplied drill template. Figure 2-7 The Drill Template Note: Drill the cable hole (hole A) when adopting the ceiling outlet to route the cable. 3. Loosen the screws on the bubble of the dome camera to remove the bubble.
  • Page 9 8. Fit the bubble back to the camera. Figure 2-11 Fit the Black Liner Back 9. Tighten the screws on the bubble of the dome camera to finish the installation. Figure 2-12 Finish Installation 2.4 Wall Mounting of Type III Camera Before you start: You need to purchase a wall mount first.

  • Page 10: Menu Description

    3 Menu Description Purpose: Call the menu by clicking the button on the PTZ Control interface, or call preset No.95. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1. Figure 3-1 Connection 2.

  • Page 11: Exposure Mode

    1). Click up/down direction button to select the item. 2). Click Iris + to confirm the selection. 3). Click left/right direction button to adjust the value of the selected item. 3.1 VIDOE FORMAT You can set the video format as 5MP@20fps, 4MP@25fps, 4MP@30fps, 2MP@25fps, and 2MP@30fps.

  • Page 12: Video Settings

    You can turn on/off the IR LIGHT and set the value of SMART IR in this menu DAY/NIGHT B & W MODE IR LIGHT SMART IR  BACK  EXIT  SAVE & EXIT Figure 3-4 B & W  IR LIGHT You can turn on/off the IR LIGHT to meet the requirements of different circumstances.

  • Page 13: Image Mode

    VIDEO SET TINGS IMAGE MODE WHITE BALANCE BRIGHTNESS CONTRAST SHARPNESS SATURATION 3DNR MIRROR BACK EXIT SAVE & EXIT Figure 3-6 VIDEO SETTINGS IMAGE MODE IMAGE MODE is used to adjust the image saturation, and you can set it as STD (Standard), or HIGH-SAT (High Saturation).

  • Page 14: Motion Detection

    MIRROR OFF, H, V, and HV are selectable for mirror. OFF: The mirror function is disabled. H: The image flips 180° horizontally. V: The image flips 180° vertically. HV: The image flips 180° both horizontally and vertically. 3.5 FUNCTIONS In the FUNCTIONS submenu, you can set the privacy mask, and the motion detection of the camera.

This manual is also suitable for:

H8t seriesDs-2ce56h8t-(a)itzfDs-2ce5ah8t-(a)vpit3zfTurbo hd h8t seriesTurbo hd ds-2ce59h8t-vpit3zfTurbo hd ds-2ce59h8t-avpit3zf ... Show all

Table of Contents