Technical Information
Flow rate
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
•
To prevent scald injury, the maximum output
temperature of the shower valve must be no
2
2.5 gpm
higher than 120°F. In Massachusetts, the
maximum output temperature of the shower
valve can be no higher than 112°F.
•
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.