Technical Information - Hans Grohe PuraVida iControl mobile 15776 Series Instructions For Use/Assembly Instructions

Standards and guidelines:
The use of the product is warranted by the following guidelines:
• EN 15200
• EN 60335-2-105
Safety Notes:
• The shower system may only be used for bathing, hygienic and
body cleansing purposes.
• Children must not use the shower system without supervision.
• Children as well as adults with physical, mental and/or senso-
ric impairments must not use this shower system without proper
supervision. Persons under the infl uence of alcohol or drugs are
prohibited from using this shower system.
• Do not allow the streams of the shower touch sensitive body
parts (such as your eyes). An adequate distance must be kept
between the shower and you.
• The hot and cold supplies must be of equal pressures.
Electrical connection:
• The installation and testing work must be performed by a skilled
electrician in observance of VDE 0100 part 701 and IEC 60364-
7-701.
• Only one socket is required for the electrical connection. The
power is supplied via an external transformer.
• No easily infl ammable material is allowed in the immediate
vicinity.
• The ambient temperature must not be higher than 50ºC.
• The entire power is supplied via a 230V/N/PE/50Hz AC con-
nection.
• The system must be protected via a leakage current protective
device (RCD/ FI) with a measurement diff erence current of ≤
30 mA.
• If a potential equalisation is required, this must be done on site.
• The current version of the applicable regulations from VDE, local
authorities and utility companies must be observed for electric
installation work.
• It must be ensured that the product can be disconnected from the
mains. Either via a freely accessible plug or via an all-pin switch
as per EN 60335-1, sect. 24.3
16
English

Technical Information

Assembly: (see page 209)
•
•
•
•
Fittings (see page 18)
Dimensions: (see page 205)
Installation example: (see page 205)
Operation: (see page 20)
•
•
Cleaning fi lter: (see page 213)
Spare parts (see page 215)
Colors
XXX =
chrome plated
000 =
white/chrome plated
400 =
Assembly see page 209
Important! The fi tting must be installed, fl ushed and tested after
the valid norms. (Installation to EN 1717)
Any work may only be carried out in a de-energized state.
The basic body 15941180 can only be installed vertically!
Installation with adjustment ring only possible in the front and
middle sections!
All components must remain accessible.
If there is a power failure of the 230 V mains power, the showers
will not function.
Le produit n'est pas prévu pour une utilisation en liaison avec
un bain à vapeur