Connecting Wirelesshd Devices (Eh-Ls9600W Only); Connecting Mhl Devices (Eh-Ls9600W Only) - Epson EH-LS9600e User Manual

Preparing

Connecting WirelessHD devices (EH-LS9600W only)

The projector receives transmissions from the WirelessHD Transmitter, and projects the images.
Change the projected image by pressing the
the control panel.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On.
WirelessHD p.91
•
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link. HDMI Link - Device Connections
s

Connecting MHL devices (EH-LS9600W only)

You can connect MHL compatible smart devices or tablets to the WirelessHD Transmitter.
Use an MHL compatible cable to connect the micro USB port of MHL devices to the HDMI5 port on the
WirelessHD Transmitter.
You can operate MHL devices from the projector's remote control.
You can also view video and listen to music while charging an MHL
device.
Warning
Be sure to use an MHL compatible cable for making connections. If you use a cable that is not compatible
when charging, a fire could occur due problems such as overheating the MHL device, leaks, and explosions.
Attention
•
When a connection is made using an MHL-HDMI conversion adapter, it may not be possible to charge or
control the device from the remote control.
•
This may not be available depending on the MHL device being used. For more details, contact the
manufacturer of the MHL device.
c
•
Some devices use more power during video playback than what is supplied and will therefore not
enable charging during video playback or other operations.
•
If the image is not projected, try disconnecting and then reconnecting the cable. If the image is still
not projected after reconnecting the cable, contact the manufacturer of the MHL device.
button on the remote control or the
p.61
23
p.67
s
button on
Settings - WirelessHD -
s