Preparing
Connecting a Computer
To project images from a computer, connect the computer using one of the following methods.
When using a computer cable
When using an HDMI cable
Fix the HDMI cable in place using the HDMI cable clamp. (EH-TW9200W/EH-TW9200/EH-TW8200W/EH-TW8200
only)
p.22
s
Connecting External Devices
Connecting to the Trigger out port
To connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm) to the
Trigger Out port.
When set to on, a signal (12 V DC) is output from this port to communicate the projector's status (on or off)
to connected devices such as electric screens.
c
When using the Trigger out port, set the Trigger Out function.
Out
p.73
Connecting WirelessHD devices (EH-TW9200W/EH-TW8200W only)
The projector receives transmissions from the WirelessHD Transmitter, and projects the images.
Change the projected image by pressing the
control panel.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On.
WirelessHD
p.70
•
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link.
HDMI Link-Device Connections
s
Extended - Operation - Trigger
s
button on the remote control or the
p.62
20
p.52
s
button on the
Settings -
s