Table of Contents
Advertisement
Configuration Menu
Function
Address 1 Setting
-
Address 2 Setting
Address 3 Setting
Others menu
Function
AMX Device Dis-
On, Off
covery
*
Control4 SDDP
On, Off
Bonjour
On, Off
*
Only EH-LS10000 is displayed.
Reset menu
To reset all of the network settings, select Yes. After you reset all the settings, the Basic menu appears.
Complete menu
Select this when you have finished making settings on the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics during setup. In this case, the
following soft keyboard is displayed. Use the
key, and then press the
keyboard to confirm your input. Press Cancel on the soft keyboard to cancel your input.
Menu/Settings
Menu/Settings
button to enter the selected character. After inputting, press Finish on the soft
Enter the destination email addresses to which
to send the notification email, and select the
problems or warnings you want to be notified
about. You can register up to three destinations.
You can enter up to 64 single-byte alphanumeric
characters for the email addresses. ( " ( ) , ; < > [ ¥ ]
cannot be used.)
You can enter up to 32 characters on the Con-
figuration menu. When entering more than
32 characters, use your Web browser to enter the
text.
p.81
s
When you want to allow the projector to be de-
tected by AMX Device Discovery, set this to On.
Set this to Off if you are not connected to an en-
vironment controlled by a controller from AMX
or AMX Device Discovery.
When you want to allow the projector to be de-
tected by Control4 SDDP, set this to On. Set this
to Off if you are not connected to an environ-
ment controlled by a controller from Control4 or
Control4 SDDP.
Set this to On when connecting to the network
using Bonjour. See Apple's Web site for more in-
formation on the Bonjour service.
http://www.apple.com/
s
buttons to move the cursor to the desired
98
Explanation
Explanation
p.96
Advertisement
Table of Contents
