Preparing
Connecting to a Computer
To project images from a computer, connect the computer using one of the following methods.
When using a computer cable
When using an HDMI cable
Fix the HDMI cable in place using the HDMI cable clamp.
Connecting to External Devices
Connecting to the Trigger out port
To connect external devices such as motorized screens, connect a mini-jack stereo cable (3.5 mm) to the
Trigger Out port.
When set to on, a signal (12 V DC) is output from this port to communicate the projector's status (on or off)
to connected devices such as electric screens.
c
When using the Trigger out port, set the Trigger Out function.
Out
p.75
Connecting WirelessHD devices (EH-TW9100W/EH-TW8100W only)
The projector receives transmissions from the WirelessHD Transmitter, and projects the images.
Change the projected image by pressing the
control panel.
c
•
When receiving WirelessHD images, make sure WirelessHD is set to On.
WirelessHD
p.73
•
You can change which device is displayed by selecting a device from Device Connections in HDMI
Link.
HDMI Link-Device Connections
s
p.21
s
Extended - Operation - Trigger
s
button on the remote control or the
p.64
20
p.53
s
button on the
Settings -
s