Table of Contents
Advertisement
Troubleshooting
"Not supported" is displayed
Check
Is the image signal format setting correct?
(Only when projecting computer image sig-
nals)
Do the image signal's frequency and resolu-
tion correspond to the mode?
"No Signal" is displayed
Check
Are the cables connected correctly?
Is the correct image input port selected?
Is the connected device turned on?
(Only when projecting computer image sig-
nals)
Are the image signals being output to the
projector?
When connecting an MHL device to the Wire-
lessHD Transmitter with an MHL cable, is it
connected to the HDMI5 port?
(EH-LS9600W only)
When Video is input
If nothing is projected even when Video Signal is set to Auto
from the Configuration menu, set the signal that matches the
connected device.
Settings - Input Signal - Video Sig-
s
nal
p.91
When Component is input
If nothing is projected even when Component is set to Auto
from the Configuration menu, set the signal that matches the
connected device.
Settings - Input Signal - Compo-
s
nent
p.91
Check the image signal being input in Resolution from the Con-
figuration menu, and check that it corresponds to the projector's
resolution.
p.117
s
Check that all the cables required for projection are securely
connected.
p.20
s
Change the image with the source buttons on the remote con-
trol, or the
button on the control panel.
Turn on the device.
Change it so that the image signal is set to external output, and
not just the computer's LCD monitor. For some models, when
the image signals are output externally, they no longer appear
on the LCD monitor.
For the computer's specifications, see the documentation sup-
plied with the computer.
If the connection is made while the power of the projector or the
computer is already turned on, the Fn key (Function key) that
changes the computer's image signal to external output may not
work. Turn off the computer and the projector, and then turn
them back on.
Connect to the HDMI5 port on the WirelessHD Transmitter.
The connected device is not compatible with MHL. For more de-
tails, contact the manufacturer of the device.
106
Remedy
Remedy
s
p.34
Advertisement
Table of Contents
