Loading The Lens Position; Erasing The Lens Position; Renaming The Lens Position - Epson EH-LS9600e User Manual

Useful Functions

Loading the Lens Position

a
Press the
The Load Lens Position screen is displayed.
b
Select the lens position name you want to load.
The zoom, focus, and lens shift are adjusted to the status you saved.
While adjustments are being performed, a message is displayed and the projector cannot be operated.
c
•
If you have saved to Memory1 or Memory2, you can load the settings by pressing the
or
•
This does not guarantee that the saved status will be completely restored. Errors could occur.

Erasing the Lens Position

a
Press the
The Erase Lens Position screen is displayed.
b
Select the lens position name you want to erase.
A confirmation message is displayed. Select Yes to erase the content of the saved lens position.
c
If you want to erase all of the saved lens positions, go to Reset - Reset Lens Position on the
Configuration menu.

Renaming the Lens Position

You can change the lens position name using up to 12 characters. Giving the memory a name that is easy to
remember is useful when loading the memory.
a
Press the
The Rename Lens Position screen is displayed.
b
Select the lens position name you want to change.
c
Enter a name.
The soft keyboard is displayed.
Use the
character, and then press the
firm the selection. Enter up to 12 characters.
When you have finished, select Finish.
The lens position name is changed.
button, and then select Load Lens Position.
button on the remote control.
button, and then select Erase Lens Position.
p.100
s
button, and then select Rename Lens Position.
p.98
s
buttons to select a
button to con-
63