Table of Contents
Advertisement
Configuration Menu
Function
Frame Interpo-
Off, Low, Normal, High
*2 *6
lation
Super-resolu-
0 - 5
*6
tion
Super-resolu-
Off, 1, 2, 3, 4, 5, 4K-1, 4K-2, 4K-3, 4K-4, 4K-5 (EH-LS10000 only)
*2 *6
tion/4K
Detail En-
Range, Strength
hance-
*2 *6 *7
ment
*4
On, Off
Auto Setup
Advanced
Noise Reduc-
*2 *3 *6
tion
Setup Level
Menu/Settings
0 - 100
Off, 1, 2, 3
*3 *6
0%, 7.5%
89
Explanation
Reduces afterimages when projecting moving
images by interpolating between one frame and
the next.
p.49
s
(EH-LS9600W only)
Reduces blurring that occurs at the edge of im-
ages when the resolution is increased.
Super-resolution (1 to 5) reduces blurring that
occurs at the edge of images when the image is
increased to 1920 x 1080 pixels.
4K Enhancement (4K-1 to 4K-5) projects 4K im-
ages (3840 x 2160 pixels), employing super res-
olution processing and creating ultra high defi-
nition images.
p.46
s
Enhances details in an image to create clear out-
lines. The higher the number, the wider the range
from the outline area effected by the enhance-
ment.
p.48
s
Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the Tracking, Position, and
Sync. are automatically configured.
(This can only be set when Image Processing is
set to Fine.)
Smoothes out rough images. There are three
modes available. Select your favorite setting.
It is recommended that this is set to Off when
viewing image sources in which noise is very low,
such as for DVDs or Blu-ray discs.
(This can be set when receiving an NTSC or com-
ponent video signal from the Video port.)
Change this setting when using devices with a
different black level (Setup Level) such as prod-
ucts designed for the Korean market. Check the
specifications for your connected device before
changing this setting.
p.46
s
Advertisement
Table of Contents
