[Group Registration] - Optex REDSCAN Series Manual

[Group Registration]

Group 1 is default group in which default unit Detector 1 is registered.
To edit registered group or detector information, disconnect current detector.
To change registered information of Detector 1, click Edit Detector Information button.
1.
Enter preferable name, select target model, and enter IP address of the target REDSCAN.
To show R.E.C. on REDSCAN Manager, enter R.E.C. port number of the target REDSCAN. (REDSCAN
Manager displays UDP R.E.C. only.)
To register new unit, click Edit Group/Detector Information button.
2.
28