[Connecting To Redscan] - Optex REDSCAN Series Manual

[Connecting to REDSCAN]

Notes:
This detector authentication can be set separately from Log-in User ID and Password.
RLS-3060 series:
When you connect to RLS-3060 after upgrading REDSCAN Manager Advanced, Entering password can be
required, as Detector Authentication.
If you have not changed the password of RLS-3060 unit, please enter the following default authentication
information and click OK.
Default Password: laser306
Or, if you changed the password, please enter it in Password window to access the unit.
RLS-2020 series:
User ID and Password can be changed.
Default User ID: REDSCAN
Default Password: OPTEX
Once the connection between REDSCAN Manager Advanced software and the REDSCAN unit was
established, the authentication information was stored.
But, if they were changed by WEB browser or other REDSCAN Manager software, entering user ID and
password which were stored in the REDSCAN unit can be required.
31