Optex REDSCAN Series Manual page 60

Limit detection area by Detection Range.
4.
⚫ In case of RLS-2020 series, Detection area can be limited vertically/horizontally by Detection Range 1
and 2. Yellow lines show the Range 1 and 2.
⚫ In case of RLS-3060 series, Detection area can be limited by the radius of A and B. Yellow lines and
arc indicate the effective detection range. Detection range expansion can be used for RLS-3060SH
version 8.0.0 or later.
⚫ To set default settings, click Restore default settings button.
Adjust Offset.
5.
⚫ Perimeter of detection area near background can be excluded by the Offset distance. In vertical mode,
obstacles on the ground or floor can generate false alarm. Also, plants and small animals can cause
false alarm.
⚫ To set default settings, click Restore default settings button.
Adjust detection area (red area in the map).
6.
(1) Cut by Scissors tool
⚫ Select Scissors tool and click an outside point.
⚫ Click second outside point. The line by 2 points cuts the detection area.
60