Establishing The Cooling Level; Changing The High-Pressure Lamp - KaVo DSEclinical 5197 Instructions For Use Manual

Instructions for use DSEclinical Typ 5197 / DSEclinical Typ 5197eH
5 Operation | 5.7 Using the PIEZOlux calculus remover

5.7.1 Establishing the cooling level

▶ Regulate the amount of exiting water with the ring.

5.7.2 Changing the high-pressure lamp

CAUTION
Danger of injury due to hot components
Risk of burn injury.
▶ Switch main device switch off.
▶ Let the handpiece cool after long use.
▶ Turn off unit.
▶ Unscrew the hose ferrule ① from the handpiece, and remove the handpiece
from the hose coupling ②.
▶ Pull the high-pressure lamp ③ out of the socket.
▶ Insert the new high pressure lamp (Mat. no. 1.002.2928) into the socket, and
make sure that the contacts are correctly positioned.
29/48