Connections And Wiring; Connecting R/W Heads - Omron V600 Operation Manual

Connections and Wiring

3-1

Connections and Wiring

3-1-1

Connecting R/W Heads

Connection Method
1,2,3...
Removal Method
14
1. Holding the rubber molding on the connector, align the connector with the
key groove and press in.
2. Press in on the connector until it locks in place.
Rubber molding
Note The connector will not lock into place if you hold onto the ring. Always hold
onto the rubber molding.
Hold onto the ring and pull straight out.
Rubber molding
Note The connector cannot be removed if you hold onto the rubber molding. Never
pull on the cable with excessive force. The conductors may be broken or dam-
aged.
Ring
Ring
Section 3-1