2N IP Safety Installation Manual page 67

Specifications:
• Supply voltage: 8 – 18VDC
• Supply current at 12 V supply:
• 1 Ω load, full power output; 1.4 A, sine wave signal; 1 A, pink noise signal
• 8 Ω load, half power output; 550 mA, sine wave signal; 400 mA, pink noise signal
• no signal; 100 mA
• standby; up to 10 mA
• Transition to standby w/o signal: 10 s
• Input level – basic: 100 mV – 6 V
• Input level – increased: 1 V – 35 V
• Input impedance: 2 kΩ parallel with 0.3 H
• Output current, 1 Ω load: 2.2 A
• Full power output: 1.6 A
• Output current, 8 Ω load: 730 mA
• Half power output: 520 mA
• Output short-circuit resistance: unlimited time
• Frequency characteristics: 100 Hz – 5 KHz ±3 dB
• Temperature range: -20 – +50 °C
• Covering: IP65 (with round cable of 5–10 mm diameter)
• Dimensions: 144 x 100 x 31 mm
• Weight: 0.3 kg
rms
rms
(sine wave)
rms
(pink noise)
rms
sine wave signal
rms
pink noise signal
rms
Installation manual 2N® IP Safety
67 / 82