2N IP Safety Installation Manual page 62

Hide thumbs Also See for IP Safety:

Table of Contents

Function:

The 2N

Security Relay is a device installed between an intercom (outside the secured area)

and the electric lock (inside the secured area). The 2N

only be activated if the valid opening code is received from the intercom.

Specifications:

Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC

Switched output:

•

Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output

depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA

DC.

•

Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available

on the output.

Dimensions: 56 x 31 x 24 mm

Weight: 20 g

Installation:

Install the 2N

IP Security Relay onto a two-wire cable between the intercom and the electric

lock inside the area to be secured (typically behind the door). The device is powered and

controlled via this two-wire cable and so can be added to an existing installation. Thanks to its

compact dimensions, the device can be installed into a standard mounting box.

Installation manual 2N® IP Safety

Security Relay includes a relay that can

62 / 82

Table of Contents