Removing Cables From The Internal Drive - IBM System Storage TS2250 Setup, Operator, And Service Manual

Step 2. Remove the Internal Drive
Figure E-2. Removing cables from the internal drive
1. Unplug the SAS interface cable and the ethernet interface cable ( 1 and 2 in
Figure E-2) from the drive. Disconnecting the internal SAS interface cable
disconnects both the SAS interface and electrical power from the drive.
Attention: DO NOT UNPLUG THE INTERNAL POWER CABLE.
2. Press the latch assembly to release the drive.
2
1
Appendix E. Information for Trained Service Personnel
E-3