Table of Contents
Advertisement
CAUTION:
v Do not install a unit in a rack where the internal rack ambient temperatures
might exceed the manufacturer's recommended ambient temperature for all
your rack mounted devices.
v Do not install a unit in a rack where the air flow is compromised. Ensure that
air flow is not blocked or reduced on any side, front, or back of a unit that is
used for air flow through the unit.
v Consideration must be given to the connection of the equipment to the supply
circuit so that overloading of the circuits does not compromise the supply
wiring or overcurrent protection. To provide the correct power connection to a
rack, refer to the rating labels on the equipment in the rack to determine the
total power requirement of the supply circuit.
v (For sliding drawers) Do not pull out or install any drawer or feature if the
rack stabilizer brackets are not attached to the rack. Do not pull out more than
one drawer at a time. The rack might become unstable if you pull out more
than one drawer at a time.
v (For fixed drawers) This drawer is a fixed drawer and must not be moved for
servicing unless specified by the manufacturer. Attempting to move the
drawer partially or out of the rack might cause the rack to become unstable or
cause the drawer to fall out of the rack.
(R001)
xvii
Safety notices
Advertisement
Table of Contents
