Removing And Installing The Refrigerant Lines From The Ac Compressor - Skoda Citigo 2012 Workshop Manual

Condenser output
1 - Quick coupling
♦ separate ⇒ page 62
2 - Clamp
3 - 5 Nm
4 - Connection fitting for refrigerant line
♦ Torsion stop with sleeve
5 - Condenser/fluid reservoir
6 - O-ring 10.80 mm; 1.82 mm
♦ replace
7 - 15 Nm
Note
After disconnecting, shut off the refrigerant lines and the con‐
denser connection with suitable caps to protect them from the
penetration of ambient humidity.
5.3.2 Removing and installing coolant lines
from the condenser - Vehicles from MY
2011
– Remove the sound dampening system ⇒ Body Work; Rep.
gr. 50 .
1 - 12 ± 1 Nm
2 - Connection fitting for refrigerant line
3 - Condenser
4 - O-rings
Note
After disconnecting, shut off the refrigerant lines and the con‐
denser connection with suitable caps to protect them from the
penetration of ambient humidity.
5.4 Removing and installing the refrigerant
lines from the AC compressor
WARNING
If the refrigerant circuit is not opened within 10 minutes after
draining it off, pressure can arise in the refrigerant circuit due
to the post-evaporation.
Evacuate the refrigerant and then open the refrigerant circuit
immediately.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤
Heating, Air conditioning - Edition 06.2013
5. Air conditioning system - engine compartment
45