Air Conditioning System - Engine Compartment - Skoda Citigo 2012 Workshop Manual

1 - Holder for refrigerant lines
❑ Summary of compo‐
nents ⇒ page 41
❑ Properly secure the re‐
frigerant lines
2 - Exhaust valve*
❑ Low-pressure side (ca‐
ble with larger diameter)
❑ for exhaust and meas‐
urement only
❑ removing and installing
⇒ page 30
❑ 9 Nm
3 - Quick coupling for refriger‐
ant line*
❑ Low-pressure side
❑ separate ⇒ page 62
4 - High-pressure sender -
G65-
❑ function ⇒ page 32
❑ remove and install, test
⇒ page 49
5 - Holder for refrigerant lines
❑ bolted with plastic nut
(2.7 Nm)
6 - Cutout for heating and air
conditioning unit air inlet
❑ under cover in the cool‐
ing-water tank
7 - Expansion valve*
❑ Removing and installing
the refrigerant lines
⇒ page 46
❑ removing and installing
8 - Valve for condensation water drain*
❑ behind heat-protection matting of the front wall (assembly plate)
❑ Fit only on removed heating and air conditioning unit
❑ check ⇒ page 47
9 - Extractor and filling valve*
❑ High-pressure side (cable with smaller diameter)
❑ for exhausting, filling and measuring
❑ removing and installing
❑ 9 Nm
10 - Ambient temperature sensor - G17-
❑ removing and installing
11 - Condenser*
❑ Removing and installing the condenser
❑ Removing and installing the coolant lines -
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤
⇒ page 50
⇒ page 30
⇒ page 48
⇒ page 54
⇒ page 43
Heating, Air conditioning - Edition 06.2013

5. Air conditioning system - engine compartment

39