Manual Operation - BWT AQA perla XL Installation And Operating Manual

10:10:37
10
81 l

Manual operation

A B
oder
10:10:38
10
00:17:41
121 l
C D
121 l
8.3 Manual operation
Press the manual operation button
A Start regeneration manually
The number of the column, which will be regene-
rated is shown in the keyfield. See Selection of
the column.
B Column change
C Cancel regeneration (not recommended)
D Perform start-up flush
(See Start-up section)
Selection of the column
Number of the column, which will be regenerated
by manual start of the regeneration.
Pressing this key will select the other column.
Press key A to start.
The individual regeneration steps (e.g. H2O) are
shown along with the regeneration time remaining.
The regeneration time depends on the inlet water
pressure and takes between 10 and 20 minutes.
EN
69
69