Emergency Operation - Toyotomi CTN-228W User Manual

Wall mounted air conditioner inverter type
Table of Contents

Advertisement

Available languages

Available languages

NOTE
This button is only available for the model with such function.
Replacement of batteries in remote controller
1. Press the back side of remote controlled marked with «
the fi g, and then push out the cover of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make sure the position of
«+» polar and «-» polar are correct.
3. Reinstall the cover of battery box.
NOTE
During operation, point the remote control signal sender at the receiving
window on indoor unit.
The distance between signal sender and receiving window should be no
more than 8m, and there should be no obstacles between them.
Signal may be interfered easily in the room where there is fl uorescent lamp
or wireless telephone. remote controller should be close to indoor unit
during operation.
Replace new batteries of the same model when replacement is required.
When you don't use remote controller for a long time, please take out the
batteries.
If the display on remote controller is fuzzy or there's no display, please
replace batteries.

Emergency operation

If remote controller is lost or damaged, please use auxiliary button to turn
on or turn off the air conditioner. The operation in details are as below:
As shown on the fi g. Open panel, press aux. button to turn on or turn off the
air conditioner. When the air conditioner is turned on, it will operate under auto
mode.
reinstall
battery
remove
Cover of battery box
panel
24
», as shown in
aux button
GB

Advertisement

Table of Contents
loading

Table of Contents