Toyotomi CTN-228W User Manual page 19

Press this button again to turn off I SENSE function and « » will disappear.
• Please put the remote controller near user when this function is set.
Do not put the remote controller near the object of high temperature or low
temperature in order to avoid detecting inaccurate ambient temperature. When
I SENSE function is turned on, the remote controller should be put within the
area where indoor unit can receive the signal sent by the remote controller.
SELF
12 button
Under unit off status, press this button to turn on or turn off the self clean
function. When the self clean function is turned on, indoor unit displays «CL».
During the self clean process of evaporator, the unit will perform fast cooling
or fast heating. There may be some noise, which is the sound of fl owing liquid
or thermal expansion or cold shrinkage. The air conditioner may blow cool or
warm air, which is a normal phenomenon. During cleaning process, please
make sure the room is well ventilated to avoid affecting the comfort.
NOTE
The self clean function can only work under normal, ambient temperature.
If the room is dusty, clean it once a month; if not, clean it once every three
months. After the self clean function is turned on, you can leave the room.
When self clean is fi nished the air conditioner will enter standby status.
HEALTH
13 button
Press this button to turn on or turn off the health and UVC functions in operation
status.
blank
No Setting
When selecting « » with remote controller, ION will be turn on.
When selecting « » with remote controller, UVC sterilization function will be
turn on.
When selecting « » with remote controller, ION and UVC sterilization
function will be turn on together.
14 button
By pressing this button, you can see indoor ambient temperature or indoor
ambient humidity on indoor unit's display. The setting on remote controller is
selected circularly as below:
blank
No Setting
GB
19