Kogan KA32LICEMKA User Manual page 9

Setting the timer
Depending on whether the ice cube maker is currently on standby or operating, the timer
can be set to start or stop operating the ice cube maker after a specified time
(0.5–19.5 hours). The default time is set to three hours. To set the timer:
1. Press the timer button. The timer delay display will start flashing '3.0H' to indicate
the default time.
2. Press the select button to set the desired time. Each press will increase the time by
0.5 hours. Holding down the select button for more than three seconds will adjust the
timer in faster intervals. The change in time will be shown on the timer delay display.
3. After five seconds of flashing, the desired time will turn solid to confirm the timer set.
Cancelling the timer
To cancel the timer, press the timer button.
Clock display
The clock display will show the current time. To adjust the time:
1. Press the clock button and the hour setting will start flashing. Press the select button
to adjust the hour setting. Each press will increase the setting by one.
2. Press the clock button again and the minute setting will start flashing. Press the
select button again to adjust the minute setting. Press the select button to adjust the
minute setting.
3. Press the clock button again to confirm the changes.
Note:
When adjusting the hour/minute settings, after flashing for five seconds, the
setting will turn solid to confirm the adjustment is set.