Transfer Measurement Data To Icare Clinic Or Icare Cloud - Icare HOME2 Instruction Manual

12.3 Transfer measurement data to iCare CLINIC or iCare
CLOUD
12.3.1 Use a USB connection
WARNING! Do not connect anything to the tonometer's USB port but the USB cable
supplied with the tonometer.
WARNING! Keep the USB cable out of the reach of children and pets due to the risk of
strangulation.
WARNING! Do not connect the USB cable to the tonometer's USB port except when
uploading patient measurement data. Do not take any measurements when the USB
cable is connected.
WARNING! The tonometer's batteries are not rechargeable. Do not try to charge the
tonometer with USB chargers connected to a mains voltage.
NOTE! If you have an iPhone, you cannot use the USB connection. Use the Bluetooth connection
instead.
USB-C
1. Open the iCare EXPORT software on your computer, or the iCare
PATIENT2 application on your mobile device.
2. Connect the tonometer to your mobile device or computer with the USB
cable provided in the tonometer's sales package. If your mobile device
has a micro-USB port, use the adapter provided in the sales box.
3. Follow the instructions shown on your mobile device or computer.
4. After removing the USB cable, put the USB cover on the tonometer's
USB port.
12.3.2 Use a Bluetooth connection
1. Open the iCare EXPORT software on your computer, or the iCare
PATIENT2 application on your mobile device.
2. Press and hold
3. Press until you see
4. Press
5. Press until you see BLUETOOTH, and press
6. Press and press
30
to switch on the tonometer.
SETTINGS
.
.
USB-C
Micro USB
USB-A
on the display.
.