Switching On; Correct Measurement Position - Icare HOME2 Quick Manual

3

Switching on

OR
3
s
3
s
Press down Alternatively, press down
until you hear a hear a beep. Then press
beep. The text enter the measurement mode. The text
"Start" is shown "Start" is shown on the display.
on the display.
until you
again to
4

Correct measurement position

8
START
The forehead Look straight ahead and the
support A rests tonometer is at a 90-degree
on your forehead angle to your face. The probe is
and the cheek about 5 mm from your eye and
support B rests points perpendicularly to the
on your cheek. center of your eye.
<90°
90°
If you see a red light in the probe
base, the tonometer is tilted too
much downwards. You should
straighten your posture and lift
your chin.
Positioning the tonometer is instructed in the
following section.
9